Flex-5000 (5k) ONLY
60m table data found in database files:

Folder location:   %userprofile%\AppData\Roaming\FlexRadio Systems\PowerSDR v2.8.0\

You should have these <Key>'s in your database. The actual values inside may differ from my values, but you can probably use these values, if your missing some values.


 <State>
    <Key>power_table[3]</Key>
     <Value>0.0140|0.0167|0.0237|0.0313|0.0410|0.0478|0.0546|0.0600|0.0660|0.0703|0.0759|0.0808|0.0862</Value>
    </State>

<State>
    <Key>pa_bias_table[3]</Key>
    <Value>0|0|0|0|0|0|0|0</Value>
  </State>

 <State>
    <Key>rx1_level_table[3]</Key>
     <Value>-61.430|-13.667|-34.217</Value>
  </State>

 <State>
    <Key>rx2_level_table[3]</Key>
   <Value>-60.794|-15.055|-33.579</Value>
  </State>

 <State>
    <Key>pa_bridge_table[3]</Key>
   <Value>0.1685|0.2295|0.4034|0.6110|0.8923|1.9452</Value>
  </State>

<State>
    <Key>swr_table[3]</Key>
    <Value>1.5572</Value>
  </State>

 <State>
    <Key>atu_swr_table[3]</Key>
    <Value>1.0000</Value>
  </State>

 <State>
    <Key>rx1_preamp_offset[3]</Key>
    <Value>-13.667/Value>
  </State>